10 hours ago
Hi - not sure if its me, but I can't ping 10.12.1.2 from R1, thus obtaining the output.
R1#sh ip sla summary
IPSLAs Latest Operation Summary
Codes: * active, ^ inactive, ~ pending
All Stats are in milliseconds. Stats with u are in microseconds
ID Type Destination Stats Return Last
Code Run
-----------------------------------------------------------------------
*1 icmp-echo 10.12.1.2 - Timeout 18 seconds ag
o
and
not
R1# show ip sla summary
IPSLAs Latest Operation Summary
Codes: * active, ^ inactive, ~ pending
ID Type Destination Stats Return Last
(ms) Code Run
-----------------------------------------------------------------------
*1 icmp-echo 10.12.1.2 RTT=2 OK 4 seconds ago
as indicated via the notes for this lab.
Something appears to be missing here.
R1#sh ip sla summary
IPSLAs Latest Operation Summary
Codes: * active, ^ inactive, ~ pending
All Stats are in milliseconds. Stats with u are in microseconds
ID Type Destination Stats Return Last
Code Run
-----------------------------------------------------------------------
*1 icmp-echo 10.12.1.2 - Timeout 18 seconds ag
o
and
not
R1# show ip sla summary
IPSLAs Latest Operation Summary
Codes: * active, ^ inactive, ~ pending
ID Type Destination Stats Return Last
(ms) Code Run
-----------------------------------------------------------------------
*1 icmp-echo 10.12.1.2 RTT=2 OK 4 seconds ago
as indicated via the notes for this lab.
Something appears to be missing here.