7 hours ago
Task 1 show command results I think are wrong.
The neighbor ID is the router-id of R20 and not the interface IP. Also priority should be 1 and not 0. Also, address is 10.2.203.20 and not 10.2.203.2.
Task 2 is good. I've recently had to learn this on a production environment. Currently on a small project to switch from EIGRP to OSPF.
The neighbor ID is the router-id of R20 and not the interface IP. Also priority should be 1 and not 0. Also, address is 10.2.203.20 and not 10.2.203.2.
Task 2 is good. I've recently had to learn this on a production environment. Currently on a small project to switch from EIGRP to OSPF.