+- How2pass.com Forums (https://www.how2pass.com/forum)
+-- Forum: CCNP (https://www.how2pass.com/forum/forum-6.html)
+--- Forum: CCNP ENARSI 300-410 Forum (https://www.how2pass.com/forum/forum-15.html)
+--- Thread: Sim CoPP question (/thread-2089.html)
Sim CoPP question - shirikodama - 07-28-2022
Hello,
Im currently using packet tracer to practice the CoPP simulation. I got to the part where these following commands need to be added, and the router is rejecting them as unrecognized commands. Can anyone tell me what I may be missing or doing wrong?
!
policy-map CoPP_CORE_ROUTER
class CoPP_CRITICAL
police 8000 conform-action transmit exceed-action transmit
class CoPP_IMPORTANT
police 8000 conform-action transmit exceed-action transmit
class CoPP_NORMAL
police 8000 conform-action transmit exceed-action transmit
class class-default
police 8000 conform-action drop exceed-action drop
RE: Sim CoPP question - Kuroneko - 08-03-2022
Try breaking it up into multiple commands. Otherwise, Packet tracer may just lack the police functionality. You get what you pay for. :\
R2(config)#policy-map SINGLE-RATE-TWO-COLOR
R2(config-pmap)#class ICMP
R2(config-pmap-c)#police 128000
R2(config-pmap-c-police)#conform-action transmit
R2(config-pmap-c-police)#exceed-action drop
RE: Sim CoPP question - speedycd - 06-08-2023
Hello,
for me I put in the exact configuration within the CoPP sim and I am unable to ping which is strange it says its dropping the packets even though I am allowing them in the access-list the rate limit should be fine.