+- How2pass.com Forums (https://www.how2pass.com/forum)
+-- Forum: CCNP (https://www.how2pass.com/forum/forum-6.html)
+--- Forum: CCNP ENARSI 300-410 Forum (https://www.how2pass.com/forum/forum-15.html)
+--- Thread: QID AR096 wrong (/thread-2431.html)
QID AR096 wrong - yokai89 - 03-21-2025
The answer is incorrect.
The Correct answer should be: "It was obtained directly from the next-hop server."
Here for Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nhrp/configuration/xe-16/nhrp-xe-16-book/config-nhrp.html
Flag Description
authoritative: The mapping was obtained directly from the next-hop router or server.
implicit: The mapping was obtained from an NHRP resolution request or packet.
local: The mapping is for networks that are local to the router.
nat: The remote device supports NHRP Network Address Translation (NAT) extensions.
negative: A mapping could not be obtained for negative caching.
(no socket): IP Security (IPSec) will not set up encryption, because data traffic does not require this tunnel.
registered: The mapping was created in response to an NHRP registration.
router: The mappings for a remote router are marked with the router flag.
unique: The mapping cannot be overwritten by a different NBMA entry with the same IP address.
used: Data packets are being process-switched for the given mapping.