+- How2pass.com Forums (https://www.how2pass.com/forum)
+-- Forum: CCNP (https://www.how2pass.com/forum/forum-6.html)
+--- Forum: CCNP ENARSI 300-410 Forum (https://www.how2pass.com/forum/forum-15.html)
+--- Thread: Experiencing problems with Sim-VRF R2 (/thread-2513.html)
Experiencing problems with Sim-VRF R2 - greaterzen1 - 07-25-2025
Hello,
I've experienced a problem with the sim-VRF. On R2 after enabling ip cef and placing the vrf (cu-red / cu-green) on the appreciate interfaces with the ip addresses nothing shows up in the respected routing tables. To my knowledge all that is needed for vrf to work:
- enable ip cef
- create the vrf with either ip vrf <vrf name> or vrf definition <vrf name>
- add the vrf to an interface
Although, I redownloaded the file the problem on R2 still persist. I've recreated this lab in eve-ng and it works. Could you please help?
P.S per the solution ip cef should be turned off for R1 and R2. However, i noticed in the sim-vrf file it is only turned off for R2 and not R1.
RE: Experiencing problems with Sim-VRF R2 - help_desk - 07-27-2025
The issue is that Ethernet0/2 on R1 and R2 is shut down. Enabling the interface will solve the problem. The lab file has been updated. Thank you!