How2pass.com Forums
OSPF Stub Sim ? - Printable Version

+- How2pass.com Forums (https://www.how2pass.com/forum)
+-- Forum: CCNP (https://www.how2pass.com/forum/forum-6.html)
+--- Forum: CCNP ENARSI 300-410 (https://www.how2pass.com/forum/forum-15.html)
+--- Thread: OSPF Stub Sim ? (/thread-1757.html)



OSPF Stub Sim ? - tech_east - 02-05-2020

I am curious as to whether I would use the process ID you have listed in the practice sims (router ospf 1) or will the real exam tell me to use a different process ID such as 44?

I understand that the process ID's do not have to match unlike the area ID just not sure if I would use router ospf 1 or router ospf 44 and if on both routers that I have to configure?

Any help would be greatly appreciated!


RE: OSPF Stub Sim ? - forumsupport - 02-05-2020

It does not matter in exam simulation as well. You can use any valid value if an OSPF routing process is not already configured. If there is one configured then you should add/change your OSPF configuration under the same existing process.


RE: OSPF Stub Sim ? - tech_east - 02-05-2020

(02-05-2020, 07:49 AM)forumsupport Wrote: It does not matter in exam simulation as well. You can use any valid value if an OSPF routing process is not already configured. If there is one configured then you should add/change your OSPF configuration under the same existing process.

@forumsupport-

Thanks for the assistance lately with a few questions regarding the Route exam....really appreciate it!

BTW, I passed todaySmile