Author Topic: ccnp-switch question SW793  (Read 352 times)

0 Members and 1 Guest are viewing this topic.

Offline Haywhy

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
  • I love How2Pass!
ccnp-switch question SW793
« on: August 01, 2018, 09:16:04 AM »
I think you might need to take a look at the question mentioned above. This is an excerpt from Cisco site to support the correct answer.

When a port is error disabled, it is effectively shut down and no traffic is sent or received on that port. The port LED is set to the color orange and, when you issue the show interfaces command, the port status shows err-disabled. Here is an example of what an error-disabled port looks like from the command-line interface (CLI) of the switch:

cat6knative#show interfaces gigabitethernet 4/1 status

Port    Name       Status       Vlan       Duplex  Speed Type
Gi4/1              err-disabled 100          full   1000 1000BaseSX

Here is what the practice test chose as the correct answer: show log