Failed Exam 6/17

[muntasiralam85]

Labs were 

1) VRF EIGRP with the exact same ip address and problems

2) DMVPN OSPF where request was to configure H0, but IPSEC needed to be configure on the BR s, couldnt make it work

3) NEtflow and DHCP: DHCP was working, how netflow has issues in Sw1 instead of R3. R3 had the input and put commands on the e0/0/ interface. Coudlnt make it work


Any help or advise wil be helpful

[elpotatoexperto]

Labs were 

1) VRF EIGRP with the exact same ip address and problems

2) DMVPN OSPF where request was to configure H0, but IPSEC needed to be configure on the BR s, couldnt make it work

3) NEtflow and DHCP: DHCP was working, how netflow has issues in Sw1 instead of R3. R3 had the input and put commands on the e0/0/ interface. Coudlnt make it work


Any help or advise wil be helpful

sorry to hear that. 

any insights to why you think you couldn't get 2 or 3 ro work?

[help_desk]

We are sorry to hear that. The exact scenarios can vary slightly from one exam to another, so it is important to focus on understanding the underlying technologies rather than memorizing specific tasks or configurations. Good news is that you now know your weaknesses and can come back stronger.

Contact us at our support email if you need any assistance. Good luck on your next try.