Ok, the forum is back. Start discussions...

Hi,

I recently decided to use How2Pass. I've tried using the testlets/simlets but can't seem to get my results. It says click the done button to get your results but after completing the questions and pressing done it tells me to move on to the next question. When backing out to look at my results, none are recorded. Any suggestions???

Thanks in advance.

i was a little bit worried because most people will the icnd 1 and 2 instead of 200-125 but i was determined to go with 200-125 the materials of how2pass was very helpful nothing unfamiliar i had two labs number 10 the vlan lab and number 9 the ipv6, im glad for the result i passed with 838 out of 1000 i recommend how2pass and definitely will come back for my ccnp. 

Do you offer practice test for CCNA Wireless 200-355?

I think you might need to take a look at the question mentioned above. This is an excerpt from Cisco site to support the correct answer.

When a port is error disabled, it is effectively shut down and no traffic is sent or received on that port. The port LED is set to the color orange and, when you issue the show interfaces command, the port status shows err-disabled. Here is an example of what an error-disabled port looks like from the command-line interface (CLI) of the switch:

cat6knative#show interfaces gigabitethernet 4/1 status

Port    Name      Status      Vlan      Duplex  Speed Type
Gi4/1              err-disabled 100          full  1000 1000BaseSX


Here is what the practice test chose as the correct answer: show log

Hallo,

warum ist die richtige Antwort bei der Frage:

- Autoconfiguration
and
- DHCPv6

Gefragt wurde doch nach stateless assignment und DHCPv6 ist doch
statefull ??

W?rde mich ?ber eine Antwort freuen.

BR
Hajo

Hi guys,
I paid for the CCNA how2pass, however the more I take these exam topics, the ore I seem to fall behind with my 60 day window approaching the deadline. Have any of you signed up for the CCNA but then took the ICND 1 exam instead? If so, can you give feedback on the exam topics i need to study?

Greetings -

Wanted to know if anyone passed recently.  What their experience was?  In the switch forum, members post detailed info on what they saw.  Hoping that this exam will be as the Switch exam was, with the majority of questions being seen here on H2P.  Thanks for any responses, Happy Holidays!

DM

How2pass is the bomb. I was a little worried at first since I didn't see any current posts of success for CCNA full exam. I was concerned that the material here could possibly be outdated, but after taking the exam today and passing with a 924 out of a possible 1000 I guarantee you, such is not the case! How2pass is on point as usual. I plan on using it for my CCNP as well.

Thanks H2P

The last multiple choice question asks you to examine the R1 routing table and determine how traffic to 10.10.10.0/24 is forwarded.
The correct answer per the simlet is that "Traffic destined to 10.10.10.0/24 ... uses RIPv2 instead of static route [because of the higher admin distance on the static route]"

While its true the static route has a higher admin distance of 200 over RIPv2 (120), HOWEVER the problem is that the network in question is not even known in RIPv2. That why when you look at the routing table, you see that the static route "wins" and has been promoted to the routing table. RIP does not even know about 10.10.10.0 because R2 has failed to advertise it.

From what I can see, all four possible answers given are incorrect. Please advise.