Experiencing problems with Sim-VRF R2

[greaterzen1]

Hello,

I've experienced a problem with the sim-VRF. On R2 after enabling ip cef and placing the vrf (cu-red / cu-green) on the appreciate interfaces with the ip addresses nothing shows up in the respected routing tables. To my knowledge all that is needed for vrf to work:

1. enable ip cef
   
2. create the vrf with either ip vrf <vrf name> or vrf definition <vrf name>
   
3.  add the vrf to an interface
   

Although, I redownloaded the file the problem on R2 still persist. I've recreated this lab in eve-ng and it works. Could you please help?

P.S per the solution ip cef should be turned off for R1 and R2. However, i noticed in the sim-vrf file it is only turned off for R2 and not R1.

[help_desk]

The issue is that Ethernet0/2 on R1 and R2 is shut down. Enabling the interface will solve the problem. The lab file has been updated. Thank you!